About Us
Our Services
- Position：
- Home Page >
- About Us >
- Our Services
· Pipe Product
1 | AS 1589:2001 | Copper and copper alloy waste fittings |
2 | ASSE Standard #1061-2015 | Performance requirements for push-fit fittings |
3 | AS 3688:2016 | Water supply and gas systems-metallic fittings and end connectors |
4 | ASME B16.22-2013 | Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings |
5 | AS 4176.2-2010 | Multilayer pipes for pressure applications multilayer piping systems for hot and cold water plumbing applications-pipes |
6 | AS 4176.3-2010 | Multilayer pipes for pressure applications multilayer piping systems for hot and cold water plumbing applications-fittings |
7 | EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings. Part 2 : fittings with compression ends for use with copper tubes. |
8 | EN 1254-3:1998 | Copper and copper alloys. Plumbing fittings. Part 3 : fittings with compression ends for use with plastics pipes. |
9 | EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings. Part4: Fittings combining other end connections with capillary or compression ends |
10 | EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings. Part 5 : fittings with short ends for capillary brazing to copper tubes. |
11 | AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
12 | AS/NZS 2492:2007 | Cross-linked polyethylene (pe-x) pipes for pressure applications |
13 | AS/NZS 2537.2:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (pe-x) for pressure applications plastics piping systems for hot and cold water installations-crosslinked polyethylene (pe-x)-fittings |
14 | AS/NZS 4129:2008 | Fittings for polyethylene (pe) pipes for pressure applications |
15 | AS/NZS 4130:2009 | Polyethylene (pe) pipes for pressure applications |
16 | AS/NZS 4401:2006 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Polyethylene (PE) |
17 | AS NZS 1260-2017 | PVC-U pipes and fittings for drain, waste and vent applications |
18 | AS/NZS 4441-2017 | Oriented PVC (PVC-O) pipes for pressure applications |
19 | AS/NZS 4765-2017 | Modified PVC (PVC-M) pipes for pressure applications |
20 | ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — unplasticized poly(vinyl chloride) (pvc-u) — part 2: pipes |
21 | ISO 1452-3:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — unplasticized poly(vinyl chloride) (pvc-u) — part 3: fittings |
22 | ISO 3633:2002 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — unplasticized poly(vinyl chloride) (pvc-u) |
23 | ISO 4427-2:2007 | Plastics piping systems — polyethylene (pe) pipes and fittings for water supply — part 2: pipes |
24 | ISO 4427-3:2007 | Plastics piping systems — polyethylene (pe) pipes and fittings for water supply — part 3: fittings |
25 | ISO 4435:2003 | Plastics piping systems for non-pressure underground drainage and sewerage — unplasticized poly(vinyl chloride) (pvc-u) |
26 | ISO 4437-2：2014 | Plastics piping systems for the supply of gaseous fuels - polyethylene (pe) — part 2: pipes |
27 | ISO 14531-1:2002 | Plastics pipes and fittings — crosslinked polyethylene (pe-x) pipe systems for the conveyance of gaseous fuels — metric series — specifications — part 1: pipes |
28 | ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — crosslinked polyethylene (pe-x) — part 2: pipes |
29 | ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — polybutene (pb) — part 2: pipes |
30 | ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — polybutene (pb) — part 3: fittings |
31 | ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — chlorinated poly(vinyl chloride) (pvc-c) — part 2: pipes |
32 | ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — chlorinated poly(vinyl chloride) (pvc-c) — part 3: fittings |
33 | ISO 15493:2003 | Plastics piping systems for industrial applications — acrylonitrile-butadiene-styrene (abs), unplasticized poly(vinyl chloride) (pvc-u) and chlorinated poly(vinyl chloride) (pvc-c) — specifications for components and the system — metric series |
34 | ISO 21003-2:2008 | Multilayer piping systems for hot and cold water installations inside buildings — part 2: pipes |
35 | ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — part 3: fittings |
36 | ISO 21138-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage — structured-wall piping systems of unplasticized poly(vinyl chloride) (pvc-u), polypropylene (pp) and polyethylene (pe) — part 1: material specifications and performance criteria for pipes, fittings and system |
37 | ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage — structured-wall piping systems of unplasticized poly(vinyl chloride) (pvc-u), polypropylene (pp) and polyethylene (pe) — part 2: pipes and fittings with smooth external surface, type a |
38 | ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations — polyethylene of raised temperature resistance (pe-rt) — part 2: pipes |
39 | ISO 22391-3:2009 | Plastics piping systems for hot and cold water installations — polyethylene of raised temperature resistance (pe-rt) — part 3: fittings |
40 | ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations — polypropylene (pp) — part 2: pipes |
41 | ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations — polypropylene (pp) — part 3: fittings |
